Conceptronic CMED2PRO - 5. Playback of Movies, Music and Photos; 5.1 Options how to play & watch photos

ENGLISH
26
5. Playback of Movies, Music and Photos
There are 3 main functions for the Conceptronic CMED2PRO
- Play & watch movies
- Play & listen to Music
- Play & watch Photos
5.1 Options how to play & watch photos
Select a photo in the Photo Menu and press the
/ ENTER Button for a Slideshow.
Rotate Photos
While playing back photos, you can use the ROTATE button to turn around photos.
Change Transition
While playing back photos, you can use the TRANS button to change the the transition between
photos. Default transition mode can be set via “Setup Menu -> Slideshow Setup -> Transition”.
MODE 01: FULL SCREEN MODE 08: RIGHT TO LEFT
MODE 02: TOP TO BOTTOM MODE 09: LEFT/RIGHT TO CENTER
MODE 03: BOTTOM TO TOP MODE 10: CENTER TO LEFT/RIGHT
MODE 04: TOP/BOTTOM TO CENTER MODE 11: IMPLODE
MODE 05: CENTER TO TOP/BOTTOM MODE 12: BLIND: LEFT TO RIGHT
MODE 06: BLIND: TOP TO BOTTOM MODE 13: CROSS FADE
MODE 07: LEFT TO RIGHT MODE 14: RANDOM
Photo zoom
Press the ZOOM button to enter or exit ZOOM mode or change zoom ratio. When a photo is
enlarged, you can use the
/ / / buttons to move it.
Music-slide-show
(viewing photos with background music)
Select a photo and press SLIDE to start.
The photos will be played in a normal Slide Show, with background Music.
When there is no music in the folder available the SLIDE functionality does not work. You can stop
viewing the photo by press PLAY/PAUSE button once (music is still playing). Press PLAY/PAUSE
again, the music will stop. Press the PLAY/PAUSE button to resume playing.
Note: In this mode, ROTATE/ZOOM are not accessible.
Change Interval Time
You can set the interval display time between two photos by pressing the DELAY button. Default
interval time is set via “Setup Menu -> Slideshow Setup -> Interval Time”.
Repeat Photos
Press the REPEAT button to play back photos repeatedly.
Create and view your Photo folder
The CMED2PRO can go directly to the folder “PHOTO” on the hard disk when the “Photo” button on
the remote control is pressed. This allows you to go quickly to your photos.
To use this function, you need to create a folder on the CMED2PRO called “PHOTO” and put your
photo files in this folder. When you press the “Photo” button on the remote control, the CMED2PRO
will go directly to this folder.