Condor XC-002 User Manual

Mechanical Key Cutting Machine CONDOR XC-002
3) According to the signal of indicator light, rotate the Micro-adjuster
until tracer and cutter’s tops have both touched the clamp. In other
words, they are at the same height. Then two indicator lights will on,
adjustment finished.
NOTE ： During the height level adjustment, main clamp and
sub-clamp must at the same side.
5.6 ROTATION SPEED ADJUSTMENT
Rotation adjustment knob locates at the right side of the machine. There are
two gears to control the rotating speed of motor.
21

Condor XC-002 Specifications

General

Brand	Condor
Model	XC-002
Category	Cutter
Language	English