Conlan CT1000 User Manual

secure open
Conlan ApS • Speditorvej 2A • DK-9000 Aalborg • Tel: +45 72 40 60 03 • Fax: +45 96 32 00 22
www.conlan.eu • info@conlan.eu
Keypad
CT1000
Art. No.: 460100 (black)
Art. No.: 460106 (white)
User Manual
CT1000_usermanual_ENGmay15

Conlan CT1000 Specifications

Power

voltage	12 VDC
voltage interval	9 - 25 VDC
output (yellow core)	Max. 500 mA
output (white code)	Max. 500 mA

Operating Environment

protection rate	IP67

Weight and Dimensions

height	130 mm
width	50 mm
depth	8 mm

Summary

Introduction

Installation

Programming Users

Positions

CT1000 has 28 positions for user codes, 1-8 digits long. Default code is 1234.

Programming the User Codes

Master Code is used to program, change, or delete user codes. Default Master Code is 4711.

Advanced Configurations

Service Code

Service Code is used for advanced settings like changing Master Code and LED indication. Default is 12347890.

Configuration Overview

Overview of settings and their default values, including Master Code, Service Code, LED indication, and output times.

Changing the Master Code

Procedure to change the Master Code from the default 4711 using the Service Code.

Changing the Service Code

Procedure to change the Service Code, which configures the CT1000's settings.

LED Indication

How to adjust the LED indication settings for Yellow, Green, and Red LEDs by entering specific values.

Output Time

Procedure to change the activation time for the two transistor outputs (yellow and white wires).

Function Settings

Settings to change functions like buzzer behavior, service code power cycling, and inverted outputs.

Activating the Output with Codes/Bell

Configuration to set which codes activate the yellow output and the bell key activates the white output.

Blocking (Duress)

Manual Reset

Technical Specifications