If your radio was on an analog channel and you entered the enhanced monitor mode, you
would get the following screen.
Finding Key Parameters
So you got a radio and now you want to know where you can find the various
parameters to set up the radio.
The first place to find analog and digital repeaters is a website called
www.repeaterbook.com. That will show all the repeaters in the world. Note that
many of the repeaters are closed and they do not want outsiders using them.
However if you only want DMR repeaters then go to www.dmr-marc.net or
www.cqdmrmap.com/. This last one is interesting because the map shows which
network the different repeaters are on.
There is a standard for UHF repeaters in that the receive frequency is always 5 MHz
from the transmit frequency. There is no agreement in the amateur community if the
transmit frequency is greater than the receive frequency or the transmit frequency is
less than the receive frequency.
There is no agreement on color codes but most repeaters have set the color code to 1.