24
• Press [OK] to save the “End Time” settings and move
directly to the TIME OUT setting.
• Please complete the TIME OUT, Still Image Resolution,
Burst Mode, Zoom settings like the settings on the PIR
operation mode.
• Then press [M] button to exit.
EXAMPLE:
#1: If a user selected the Time Lapse mode, and sets the Start
Time to 07:00 and End Time at 20:30, then selects the Timeout
to be 3 mins with a Burst mode of 3 pictures, this means that the
camera will keep taking 3 pictures for every 3 minutes within the
time frame of 7:00AM to 8:30PM. When not within the Time
Lapse time frame, the camera will follow the normal PIR
detection settings.
#2: If a user selected the Time Lapse mode setting as Start Time
00:00 and End Time 00:00, then selected the Timeout to be 5
mins with a Burst mode of 3 pictures, this means the camera will
keep taking 3 pictures for every 5 minutes, 24 hours a day non-
stop.
Time Lapse Setup Recommendations:
We recommend that if your using the Time Lapse feature and
what to extend your battery life and get the most pictures
possible, use the following settings:
Batteries: Energizer Lithium Batteries
Resolution: Base (1 Star–3Mp)
Time Out: 15 seconds
To Next Page
Loading...