Sealing capacity: 1500 seals/charge with PVC tubes up to 6.2 mm (0.24”)
outer diameter at 20 °C (68 °F)
Sealing time: 1-2 sec., max 5 sec. depending on tubing.
Operation: Continuous, max 480 seals per hour.
Intended purpose: The intended clinical benet of Qseal-extra is safe sealing of
tubes and bags. Intact seals minimize the risk for contamination
and discards of blood component and provide safety for the
user and patient.
Input Power: Charger 100-240 V ~ - 50/60 Hz
Battery 28 VDC, 2.2Ah, NiMH
Consumption: Charger: 35 W, Sealer: 150 W max
Fuses: Battery: 50A/ 70°C (158°F)
Sealer: 10A (internal)
RF Output: 150 W max. / 50 Ω / 40.680 MHz
Size and weight Main unit: W: 210 mm (8.3”)
including battery: H: 75 mm (3”)
D: 240 mm (9.5”)
2.95 kg (6.5 lbs)
Hand unit: L: 220 mm (8.6”)
Ø: 25 mm (1”)
0.34 kg (0.75 lbs)
Coaxial cable: L: 2.3 m (7.5`)
Temperature: Operating: +5 - 35°C (60 - 95°F)
Storage: - 20 - 70°C (- 4 - 158°F)
Humidity: Operating: 10 - 90% Rh (non condensing)
Storage: 10 - 90% Rh (non condensing)
Altitude: Operating: maximum 3000 meters (9842 feet), (1060 - 700 hPa)
5
CS624 Qseal-extra Operator´s manual
To Next Page
Loading...