EasyManua.ls Logo

Consumer Cellular ZMAX 10 - Setting Up Wi-Fi Calling

Consumer Cellular ZMAX 10
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
130 131
Problem Possible causes Possible solution
Cannot turn your
phone on
Battery power has been
depleted.
Recharge the phone’s
battery.
nano-SIM card
error
The nano-SIM card has
malfunctioned or is
damaged.
Call customer support at
(800) 686-4460.
The nano-SIM card is
inserted improperly.
Insert the nano-SIM card
properly.
Debris is on the nano-SIM
card contacts.
Use a soft, dry cloth to
clean the nano-SIM card
contacts.
Cannot answer
incoming calls
You have activated the Call
blocking feature.
Disable this feature. See
Phone Calls – Adjusting
Your Call Settings – Setting
Call Blocking
.
Cannot make
outgoing calls
You have activated the
Fixed Dialing Numbers
feature.
Disable this feature. See
Phone Calls – Adjusting
Your Call Settings – Using
Fixed Dialing Numbers
.
TROUBLESHOOTING
Problem Possible causes Possible solution
Unable to
connect to the
network
The nano-SIM card is
invalid.
Call customer support at
(800) 686-4460.
You are not within the
network’s service area.
Check the service area with
Consumer Cellular.
Poor signal.
Move to an open space, or
if you are inside a building,
move closer to a window.
PIN Code
blocked
You have entered an
incorrect PIN code three
consecutive times.
Call customer support at
(800) 686-4460.
Phone crashes,
reboots, freezes,
or cannot be
powered on
Some third-party software
is not compatible with your
phone.
Uninstall the software
that may be causing the
problem.
Upgrade the phone
software.
Reset the phone to factory
status.
TROUBLESHOOTING

Table of Contents

Related product manuals