CHAPTER 5 –
S
o
f
twa
r
e
U
tilitie
s
SPI-6941-LV 43
5
.
1
.
2
D
r
i
v
e
r
i
n
st
a
ll
a
t
i
on
t
o
W
i
ndo
w
s
N
T
4
.
0
Install the following drivers after installing the OS:
-Chipset Driver
-Graphics Driver
-Ethernet Driver
- Chipset Driver
Run the \SPI_6941\Chipset\VIA694x\4in1\4in1438(2)v(a) application. Follow the on-
screen instructions to install the chipset driver with the default values. Then, reboot the system.
The Setup application is common to OSs.
- Graphics Driver
Install the display driver from
\SPI_6941\Video\Lynx3DM\Winnt40. Open the
Display Properties dialog box from Control Panel, then select [Display setup] → [the kind of
display] → [Change of the kind of adapter] for installation. Follow the on-screen instructions
and specify the above folder to install the driver. Then, reboot the system. If the monitor
connected is not Plug and Play-compliant, it may not display anything.
- Ethernet Driver
Copy the files of Ethernet drivers to a formatted Floppy disk from
\SPI_6941\LAN\82559ER\Winnt40. Open the Network Properties dialog box from
Control Panel, then check “Wired to the network” and select [Next]. [Select from list] → [Have
disk] for installation. Follow the on-screen instructions and specify the Floppy disk to install
the driver. Then, reboot the system. For individual settings, consult your network administrator.
To Next Page
Loading...