CHAPTER 5 –
S
o
f
twa
r
e
U
tilitie
s
44 SPI-6941-LV
5
.
1
.
3
D
r
i
v
e
r
i
n
st
a
ll
a
t
i
on
t
o
W
i
ndo
w
s
2000
Install the following drivers after installing the OS:
- Chipset Driver
- Graphics Driver
- Ethernet Driver
- Chipset Driver
Run the \SPI_6941\Chipset\VIA694x\4in1\4in1438(2)v(a) application. Follow the on-
screen instructions to install the chipset driver with the default values. Then, reboot the system.
The Setup application is common to OSs.
- Graphics Driver
Install the display driver from \SPI_6941\Video\Lynx3DM\Win2K. Open the Display
Properties dialog box from Control Panel, then select [Hardware] → [Device manager] →
[Video controller] for installation. Follow the on-screen instructions and specify the above
folder to install the driver. Then, reboot the system. If the monitor connected is not Plug and
Play-compliant, it may not display anything.
- Ethernet Driver
Install the Ethernet driver from \SPI_6941\LAN\82559ER\Win2K. Open the Display
Properties dialog box from Control Panel, then select [Hardware] → [Device manager]
→[Other Device] → [Network Adapters] → [Driver] → [Update Driver] for installation.
Follow the on-screen instructions and specify the above folder to install the driver. Then,
reboot the system. For individual settings, consult your network administrator.
To Next Page
Loading...