CHAPTER 5 –
S
o
f
twa
r
e
U
tilitie
s
SPI-6941-LV 45
5
.
1
.
4
D
r
i
v
e
r
i
n
st
a
ll
a
t
i
on
t
o
W
i
ndo
w
s XP
Install the following drivers after installing the OS:
-Graphics Driver
-Ethernet Driver
- Graphics Driver
Install the display driver from
\SPI_6941\Video\Lynx3DM\WinXP. Open the
Control Panel, then select [Performance and Maintenance] → [System] → [Hardware] →
[Device Manager] → [Display Addaptor] → [Silicon Motion Lynx3DM] → [Driver] →
[Update Driver] for installation. Follow the on-screen instructions and specify the above folder
to install the driver. Then, reboot the system. If the monitor connected is not Plug and Play-
compliant, it may not display anything.
- Ethernet Driver
Open the Control Panel, then select [Performance and Maintenance] → [System] →
[Hardware] → [Device Manager] → [Other Device] → [Ethernet Controller] → [Driver] →
[Update Driver] for installation. Follow the on-screen instructions and specify the above folder
to install the driver. Then, reboot the system.
To Next Page
Loading...