Press and
SETTING UNIT WEIGHT THROUGH KEYBOARD
Unit weight can be either set through the keyboard or scale calculates it with known number of
samples.
For Unit weight entry, Press , Scale displays
Unit wt display indicates the current unit weight and pieces display indicates the memory no.
Use numeric keys to enter new unit weight. Press key to store new unit weight.
Press to quit without saving.
SETTING UNIT WEIGHT WITH KNOWN NO. OF SAMPLES
Scale calculates unit weight when known number of samples are on the pan.
Remove all items from the pan and make weight reading zero by pressing key.
Keep container on the pan , if required, and Press or key to zero the weight.
Put known number of samples on the pan.
To Next Page
Loading...
General