Edition 03/2022 - ACE – Technical documentation - page 10
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
8. When the coffee temperature is reached (after 5 minute), the display shows the coffee boiler
setting T° (For example: 90 .0 for 90 °C). And the leds came On
9. The machine continues to heat up the stem boiler.
When the steam boiler reach 100°C, the manometer M2 start to raise.
10. When the steam temperature is reached.
The manometer M2 show the pressure steam boiler (around 1,2 Bars)
The manometer M1 show the network pressure.
11. The machine is ready to be used.
The leds buttons are On
The display shows the setting T° of the coffee boiler.
To Next Page
Loading...
