Edition 03/2022 - ACE – Technical documentation - page 20
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
11 RESET
It is possible to reset the machine in case of unexpected troubles.
Switch OFF the machine by activating Switch ON/OFF button under the machine.
Keep pressed key B1 +B2 + B3 together.
And then Switch On the machine by activating Switch ON/OFF button under the machine.
Keep B1+B2+B3 pressed together until the display shows “Prt” on the display.
Release the B1+B2+B3 button.
Switch Off and Switch On the machine by activating Switch ON/OFF button under the machine.
The machine is reset. The leds are On and the display shows:
The machine is set with the factory parameters:
Steam T° = 123 °C
Coffee T° = 90 °C
Group T° = 90 °C
Filling Up = without pump
To Next Page
Loading...
