Edition 03/2022 - ACE – Technical documentation - page 19
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
6. Press B3 Button: the display Shows
7. Press B2 Button to select On
8. Press B3 Button to launch the “automatic Purge” process.
The cycle takes around 5 minutes, opening and closing valves and pump.
The LEDs are Off
The display shows “Pur” blinking:
9. When the process is finished, the machine turns into “Eco” mode.
The display shows “Eco” and the LEDs are Off:
10. Turn back to the normal mode pressing B2 button:
11. The machine turns in “Normal mode”:
To Next Page
Loading...
