Edition 03/2022 - ACE – Technical documentation - page 12
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
8. Press B2 Button to select On
9. Press B3 to launch the “automatic first installation process.
The cycle takes around 5 minutes, opening and closing valves and pump.
The leds are Off
The display shows “1st” blinking:
10. When the process is finished, the machine turn into ECO mode.
The display shows “Eco” and the leds are Off:
11. Turn back to the normal mode pressing B2 button:
12: The machine turns in “Normal mode”:
If the machine is filling or heating up the boiler, the 3 leds are blinking:
To Next Page
Loading...
