Edition 03/2022 - ACE – Technical documentation - page 24
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
F06 = WATER LEVEL SENSOR TANK
This parameter allows you to configure the machine in water network or water tank (autonomous
version)
OFF: Water network
ON: Water tank
F07 = FLUSHING MODE :
Flushing mode is active: the 1st espresso key becomes a “Flush Key”
= it opens for 1 second when pressed
Flushing mode is disabled
F08 = EXHIBITION MODE:
This function allows you to expose a machine without the need for water or electrical power
Exhibition mode is active ON
Exhibition mode is disabled OFF
1ST INSTALLATION
See chapter n° 6.
CIRCUIT PURGE
See chapter n° 10.
SAVE AND EXIT:
The display shows: “Esc”
Press B3 (Esc Button), to save the data and come back to the “Eco” mode.
Press B2 (“+” button), to turn to “Normal” mode.
The machine turns in “Normal mode”:
To Next Page
Loading...
