MONTE-CARLO - 11/2015 - SOFT V 2.11 9
6 STARTING & WARM UP:
A. Switch ON the machine by pressing on the main display.
B. The key boards are lighting, and shows the coffee boilers temperature settings
Coffee buttons are blinking. General display blinking
C. When the temperature setting of coffee boilers is reached (2 or 3 minutes): automatic purge goes on.
The leds stay On General display blinking
D. When the steam boiler temperature reaches 105°C: hot water button lights up.
The leds stay On General display blinking
E. When the steam boiler temperature setting is reached (ex.125°C).
The machine is ready. All the lights stay On.
General display shows manometers
To Next Page
