To Next PageTo Next Page
Need help?Do you have a question about the Continental Fireplaces CDV36PTR and is the answer not in the manual?
General| Model | CDV36PTR |
|---|---|
| Type | Direct Vent Gas Fireplace |
| Fuel Type | Natural Gas or Propane |
| Venting | Direct Vent |
| Log Set Material | Ceramic Fiber |
| Ignition Type | Electronic Ignition |
| Warranty | Limited Lifetime Warranty |
Detailed physical dimensions and specifications for the CDV36 model.
Detailed physical dimensions and specifications for the BCDV36 model.
Key safety warnings and general guidelines for appliance installation and operation.
Appliance performance ratings, efficiencies, and fuel type information.
Explanation of the information provided on the appliance's rating plate.
Specifies approved vent components and maximum/minimum vent lengths.
Illustrates standard top and rear exit vent installation configurations.
Instructions for non-standard venting like periscope and corner terminations.
Defines required minimum clearances for vent terminals from building features.
Calculations and requirements for top exit horizontal vent runs.
Calculations and requirements for rear exit horizontal vent runs.
Venting calculations and requirements for vertical terminations.
Steps for preparing the CDV36 model for rear exit venting.
Steps for preparing the CDV36 model for top exit venting.
Steps for preparing the BCDV36 model for rear exit venting.
Steps for preparing the BCDV36 model for top vent installation.
Instructions for framing the enclosure for the CDV36 appliance.
Specific measurements for framing clearances around the CDV36 appliance.
Instructions for framing the enclosure for the BCDV36 appliance.
Required clearances for enclosures around the appliance body.
Clearances required for mantels installed above the appliance.
Step-by-step instructions for removing and installing the appliance door.
Instructions for installing the upper and lower louvre components.
Correct positioning of logs for optimal flame and appearance.
Instructions for installing the optional rock kit for decorative purposes.
Essential safety precautions to review before lighting the appliance.
Step-by-step guide for lighting the pilot and main burner.
Procedure for safely shutting off the gas supply to the appliance.
How to adjust the pilot burner flame size and gas pressure.
Adjusting the air shutter for desired flame characteristics.
Visual checks for normal pilot and burner flame appearance.
Step-by-step instructions for replacing the appliance door glass.
Guidelines for cleaning and maintaining the appliance glass.
List of common replacement parts with reference numbers and descriptions.
List of flexible vent kits, components, and associated part numbers.
List of common vent terminal kits and various accessory parts.
Guide to diagnosing and resolving common appliance issues and symptoms.
Troubleshooting guide for flame appearance, carboning, and gas issues.
Details of the limited warranty, including coverage and exclusions.
Terms, conditions, and limitations applicable to the product warranty.
Log for recording appliance maintenance, service dates, and technician notes.
