Control Systems 3B6 SLIM - System Password Procedure; Entering and Navigating System Password

System Password
10
Once power is applied the display will indicate the software version, date and model
number of machine, at that point press and release the ENTER pushbutton.
3B6
The display will change to the Code access page to enter the password. The displayed
value will be 4477 with an asterisk above it.
Please Confirm
Enter
ACT
a
r
h
l
STOP
Index
+
-
TXW003 10/06/10
BT26106
Enter
ACT
a
r
h
l
STOP
Index
+
-
*
Code : 4477
Using the INDEX pushbutton scroll the asterisk over the number and using the UP or
DOWN pushbuttons change the value to (1635 ) password for angle and length
calibration. Once you have changed the first value use the INDEX pushbutton to scroll
the asterisk over the next value to change it. Continue this until the value is 1635.
Enter
ACT
a
r
h
l
STOP
Index
+
-
*
Code : 1635
Once the value indicates 1635, press and release the ENTER pushbutton to confirm.