To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK4401 and is the answer not in the manual?
General| Model | Commander SK4401 |
|---|---|
| Frequency Range | 0-400 Hz |
| Enclosure Type | IP20 |
| Humidity | Up to 95% non-condensing |
| Type | AC Drive |
| Input Voltage | 380-480 V |
| Control Method | Sensorless Vector Control |
| Communication Options | RS485 |
| Operating Temperature | -10 to 40 °C |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
Specifications detailing the drive's operational capacity and performance.
Guidance on surface/through-panel mounting and bracket fitting.
Location of terminals and specifications for torque settings.
Instructions for connecting AC/DC power and ground terminals.
Measures for Electromagnetic Compatibility, including filters and grounding.
Procedure for selecting and changing drive parameters.
Steps for setting, unlocking, and resetting security codes.
Procedure for commissioning the drive using terminal connections.
Procedure for commissioning the drive using the keypad interface.
List of trip codes, their conditions, and possible causes for troubleshooting.
