Control Techniques Commander SK5402

EF
www.controltechniques.com
Getting Started Guide
Commander SK
Model sizes 2 to 6
AC variable speed drive for 3
phase induction motors
Part Number: 0472-0064-02
Issue: 2
Pneutrol International Ltd, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU
www.pneutrolspares.com, sales@pneutrol.com, Tel: +44 (0) 28 9448 1800

Control Techniques Commander SK5402 Specifications

General

Model	Commander SK5402
Category	Controller
Enclosure Rating	IP20
Input Frequency	50/60 Hz
Power Supply Voltage	380-480 V
Output Power	4 kW
Communication Protocols	Modbus RTU, CANopen
Input Voltage	380-480VAC

Summary

Commander SK Getting Started Guide

General Information

Declaration of Conformity (Size 2 to 3)

Declaration of Conformity (Size 4 and 5)

Declaration of Conformity (Size 6)

Safety Information

Electrical Safety

General warnings regarding high voltages, shock risks, and safe electrical practices.

System Design & Personnel Safety

Requirements for system design, installation, and personnel safety for safe operation.

Electrical Installation Safety

Product Information

Rating Data

Mechanical Installation

Mounting Methods

Through-Panel Mounting

Electrical Terminals

Terminal Sizes and Torque Settings

Electrical Installation

Power Connections

Diagrams and explanations for AC and DC power connections to the drive.

Ground Connections

EMC and Grounding Hardware

Control Terminals IO Specification

Keypad and Display

Selecting and Changing Parameters

Parameter Access and Security

Parameters

Parameter Descriptions - Level 2

Diagnostic Parameters

Quick Start Commissioning

Terminal Control

Keypad Control

Diagnostics

Trip Codes and Conditions

List of trip codes, their conditions, and possible causes for troubleshooting.

Alarm Warnings and Logic Diagram

Parameter List