Control Techniques Commander SK2401 - User Manual

EF
www.controltechniques.com
Getting Started Guide
Commander SK
Model sizes 2 to 6
AC variable speed drive for 3
phase induction motors
Part Number: 0472-0064-02
Issue: 2
Pneutrol International Ltd, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU
www.pneutrolspares.com, sales@pneutrol.com, Tel: +44 (0) 28 9448 1800

Control Techniques Commander SK2401 Specifications

General

Model	Commander SK2401
Protection Class	IP20
Enclosure Rating	IP20
Type	AC Drive
Communication Protocols	CANopen
Frequency	0 to 400 Hz
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, phase loss
Control Method	Sensorless Vector Control (SVC) and V/F control

Summary

Safety Information

General Safety Precautions

Covers warnings, system design, access, fire protection, and compliance.

Electrical Safety and Installation

Details electrical hazards, installation precautions, and shock risks.

Mechanical Installation

Mounting Methods and Dimensions

Provides detailed drawings and dimensions for surface and through-panel mounting.

IP Rating and Enclosure Sealing

Electrical Installation

Power Connections

Details AC/DC power, ground connections, and wiring diagrams.

EMC Compliance and Grounding

Covers grounding hardware, EMC filters, leakage currents, and precautions.

Control Terminal I;O Specification

Parameters

Level 1 Parameters

Details basic drive set-up parameters like speed, acceleration, and configuration.

Level 2 Parameters

Diagnostic Parameters

Quick Start Commissioning

Terminal Control Commissioning

Step-by-step guide for commissioning using terminal connections.

Keypad Control Commissioning

Step-by-step guide for commissioning using the keypad.

Diagnostics

Troubleshooting Trip Codes

Lists common trip codes, their conditions, and possible causes.

Alarm and Display Indications