To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK2202 and is the answer not in the manual?
General| Brand | Control Techniques |
|---|---|
| Model | Commander SK2202 |
| Category | Controller |
| Language | English |
Covers warnings, cautions, electrical safety, system design, environmental limits, and access.
Details fire protection, regulations, motor installation, parameter adjustments, and installation guidelines.
Details drive ratings, duty cycles, and short-term overload capabilities.
Provides detailed technical specifications, including model code explanation and electrical ratings.
Lists and illustrates the accessories included in the Accessory Kit Box for the drive.
Step-by-step instructions for removing and refitting terminal covers with specified torque settings.
Details surface and through-panel mounting options, including dimensions and hole locations.
Covers mounting brackets, IP rating, through-panel mounting considerations, and electrical terminal locations/torque.
Details AC, DC, and ground connections for various drive sizes and configurations.
Explains heatsink fan operation, supply requirements, and environmental considerations.
Discusses ground leakage, EMC considerations, and grounding hardware for compliance.
Details the specifications for control terminal inputs and outputs, including voltage and current signals.
Describes the function of programming and control keys for operating the drive.
Guides on selecting, viewing, and changing parameter values using the keypad.
Covers saving parameters, parameter access levels, security codes, and resetting defaults.
Details basic drive setup parameters, including minimum/maximum speed, acceleration, and deceleration rates.
Covers parameter descriptions from Level 2, including start/stop logic, brake control, and jog reference.
Details configurable parameters (61-70) and advanced parameters (71-80) for setup.
Lists read-only parameters for fault diagnosis, including frequency reference, DC bus voltage, and motor data.
Provides a step-by-step guide for initial commissioning using terminal connections and basic setup.
Guides on initial commissioning using the drive's keypad and display for setup.
Lists trip codes, their conditions, and possible causes for drive fault diagnosis.
Explains alarm indications, warnings, and the drive's diagnostic logic flow.
Lists and describes optional modules and accessories for enhancing drive functionality.
Provides a comprehensive list of Level 1 and Level 2 parameters with defaults.
Lists Level 3 parameters and diagnostic parameters with their default values.
