To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK2403 and is the answer not in the manual?
General| Model | Commander SK2403 |
|---|---|
| Power Supply Voltage | 200-240VAC |
| Input Voltage | 200-240VAC |
| Enclosure | IP20 |
| Frequency | 50/60 Hz |
| Communication Options | RS485 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Short Circuit |
| Operating Temperature | -10°C to +40°C |
| Control Method | Sensorless Vector Control |
General warnings, cautions, and notes for safe operation and handling of the drive.
Precautions against electrical shock hazards and safe practices for drive installation.
Guidelines for system design and ensuring personnel safety during drive operation.
Recommendations for motor installation and parameter adjustment for safe operation.
Detailed safety measures for electrical installation, including isolation and stored charge.
Wiring diagrams for AC/DC power connections and detailed grounding procedures.
Discussion on ground leakage current and Electromagnetic Compatibility (EMC) measures.
Step-by-step guide for commissioning the drive using terminal connections.
Step-by-step guide for commissioning the drive using the keypad interface.
Lists trip codes, conditions, and possible causes for drive faults.
