Control Techniques Commander SK2403 User Manual

4 Commander SK Size 2 to 6 Getting Started Guide
www.controltechniques.com Issue Number: 2
Declaration of Conformity (Size 2 to 3)
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
The AC variable speed drive products listed above have been designed
and manufactured in accordance with the following European
harmonised standards:
1
These products are for professional use, and power input exceeds
1kW for all models, so no limits apply.
These products comply with the Low Voltage Directive 73/23/EEC, the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the CE
Marking Directive 93/68/EEC.
W. Drury
Executive Vice President, Technology
Newtown
Date: 3rd February 2006
These electronic drive products are intended to be used with
appropriate motors, controllers, electrical protection components
and other equipment to form complete end products or systems.
Compliance with safety and EMC regulations depends upon
installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by
professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the
country where it is to be used. Refer to this User Guide. An EMC
Data Sheet is also available giving detailed EMC information.
SK2201 SK2202 SK2203
SK3201 SK3202
SK2401 SK2402 SK2403 SK2404
SK3401 SK3402 SK3403
SK3501 SK3502 SK3503 SK3504 SK3505 SK3506 SK3507
EN 61800-5-1
Adjustable speed electrical power drive systems -
safety requirements - electrical, thermal and energy
EN 61800-3
Adjustable speed electrical power drive systems.
EMC product standard including specific test
methods
EN 61000-6-2
Electromagnetic compatibility (EMC). Generic
standards. Immunity standard for industrial
environments
EN 61000-6-4
Electromagnetic compatibility (EMC). Generic
standards. Emission standard for industrial
environments
EN 61000-3-2
1
Electromagnetic compatibility (EMC). Limits. Limits
for harmonic current emissions (equipment input
current up to and including 16 A per phase)
EN 61000-3-3
Electromagnetic compatibility (EMC). Limits.
Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current <= 16 A

Control Techniques Commander SK2403 Specifications

General

Brand	Control Techniques
Model	Commander SK2403
Category	Controller
Language	English