To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK4402 and is the answer not in the manual?
General| Model | Commander SK4402 |
|---|---|
| Category | Controller |
| Input Voltage | 380-480 V AC |
| Enclosure | IP20 |
| Frequency Range | 0-400 Hz |
| Weight | 2.5 kg |
| Protection Features | Overload, Short Circuit, Overvoltage, Undervoltage |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 95% RH (non-condensing) |
| Control Mode | Sensorless Vector Control |
| Control Method | V/F Control, Sensorless Vector Control |
Covers warnings, cautions, notes, access restrictions, and fire protection requirements.
Details electrical and mechanical installation safety, system design, and personnel safety.
Focuses on motor installation safety and safe parameter adjustment practices.
Covers drive mounting methods (surface/through-panel) and bracket fitting details.
Describes electrical terminal locations and specified torque settings for safe connections.
Details AC/DC power connections and ground connections for various drive sizes.
Details the procedure for selecting and changing parameters via the keypad.
Provides minimum required control terminal connections and a step-by-step guide for terminal control.
Step-by-step guide for commissioning the drive using keypad control.
