Control Techniques Commander SK2404

EF
www.controltechniques.com
Getting Started Guide
Commander SK
Model sizes 2 to 6
AC variable speed drive for 3
phase induction motors
Part Number: 0472-0064-02
Issue: 2
Pneutrol International Ltd, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU
www.pneutrolspares.com, sales@pneutrol.com, Tel: +44 (0) 28 9448 1800

Control Techniques Commander SK2404 Specifications

General

Brand	Control Techniques
Model	Commander SK2404
Category	Controller
Language	English

Summary

Declaration of Conformity (Size 2 to 3)

Declaration of Conformity (Size 4 and 5)

Declaration of Conformity (Size 6)

Safety Information

General Safety Precautions

Covers warnings, cautions, system design, environmental limits, access, and fire protection.

Installation and Electrical Safety

Addresses regulatory compliance, motor installation, parameter adjustments, and electrical risks.

Product Information

Mechanical Installation

Electrical Installation

Electrical Terminals and Torque Settings

Illustrates terminal locations and specifies terminal sizes and torque settings.

Power, Ground, and Heatsink Fan Connections

Details AC/DC power, ground connections, and heatsink fan supply.

Keypad and Display

Control Terminal IO Specifications

Details input/output specifications for control terminals.

Keypad Operation and Parameter Management

Explains keypad functions, parameter access, and changing parameters.

Parameters

Parameter Descriptions - Level 1

Describes basic drive set-up parameters (Pr 01-10).

Parameter Descriptions - Level 2

Parameter Descriptions - Level 3

Quick Start Commissioning

Terminal Control Commissioning

Keypad Control Commissioning

Diagnostics

Drive Trip Codes and Causes