To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK3402 and is the answer not in the manual?
General| Brand | Control Techniques |
|---|---|
| Model | Commander SK3402 |
| Category | Controller |
| Language | English |
Explains the meaning of warning, caution, and note symbols used in the manual for safety.
Covers electrical hazards, system design safety, and personnel protection requirements.
Procedures for isolating the drive, limitations of the STOP function, and hazards from stored electrical charge.
Explains dual ratings (Heavy Duty/Normal Duty) and their effect on motor protection and overload capability.
Details how motor thermal protection (I²t) operates based on speed and parameter settings.
Provides short-term overload limits and explains the Commander SK product code structure.
Lists detailed electrical specifications, including nominal power, current, and fuse ratings for 200V drives.
Lists detailed electrical specifications for 400V and 575V Commander SK drives, including input current and fuse ratings.
Lists detailed electrical specifications for 690V and 200V Commander SK drives, including input current and fuse ratings.
Lists detailed electrical specifications for 575V and 400V Commander SK drives, including input current and fuse ratings.
Details terminal types, sizes, and torque settings for power and ground connections to ensure safety.
Wiring diagrams for AC and DC power connections for Commander SK drives of size 2 and 3.
Illustrates power connection diagrams for Commander SK drives of size 4, 5, and 6.
A guide on navigating the parameter menu and modifying parameter values using the keypad.
Details essential Level 1 parameters for configuring minimum/maximum speeds, acceleration, and deceleration rates.
Settings for brake release/apply current thresholds, frequencies, and delays for motor braking control.
A step-by-step guide for initial drive setup using terminal connections, including autotune.
Lists common drive trip codes, their conditions, and potential causes for troubleshooting.
Lists Level 1 drive parameters, their descriptions, default values (Eur/USA), and types.
Lists Level 2 drive parameters, their descriptions, default values (Eur/USA), and types.
Lists Level 3 drive parameters, their descriptions, default values, and types.
