To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques Commander SK6402 and is the answer not in the manual?
Covers warnings, electrical shock risks, system design, mechanical handling, and parameter adjustment safety.
Comprehensive tables detailing model numbers, power, current, and fuse ratings.
Instructions and diagrams for surface and through-panel mounting of the drive.
Diagrams and guidance for AC and DC power connections to the drive.
Instructions for making secure ground connections for safety and EMC compliance.
Step-by-step guide for commissioning using terminal connections.
Step-by-step guide for commissioning using the keypad.
List of trip codes, their conditions, and possible causes for troubleshooting.
Table of alarm warnings, their conditions, and recommended solutions.
Covers warnings, electrical shock risks, system design, mechanical handling, and parameter adjustment safety.
Comprehensive tables detailing model numbers, power, current, and fuse ratings.
Instructions and diagrams for surface and through-panel mounting of the drive.
Diagrams and guidance for AC and DC power connections to the drive.
Instructions for making secure ground connections for safety and EMC compliance.
Step-by-step guide for commissioning using terminal connections.
Step-by-step guide for commissioning using the keypad.
List of trip codes, their conditions, and possible causes for troubleshooting.
Table of alarm warnings, their conditions, and recommended solutions.
General| Model | Commander SK6402 |
|---|---|
| Category | Controller |
| Power Rating | 2.2kW |
| Frequency | 50/60 Hz |
| Enclosure Type | IP20 |
| Communication Protocols | Modbus RTU, CANopen |
| Operating Temperature | -10°C to +40°C |
| Storage Temperature | -20 to +60 °C |
| Humidity | 95% RH (non-condensing) |
| Control Method | Sensorless Vector, Volts/Hertz |
