Flash XDR User’s Manual
Specifications
HD/SD-SDI I/O
Formats:
• 1920x1080i @ 60, 59.94, 50 Hz
• 1920x1080p @ 30, 29.97, 25, 24, 23.98 Hz
• 1920x1080psf, @ 30, 29.97, 25, 24, 23.98 Hz
• 1280x720p @ 60, 59.94, 50, (29.97, 25, 23.98 ver1.5.25) Hz
• 720x486 @ 29.97 Hz
• 720x576 @ 25 Hz
Standards:
• SMPTE 274M (1080i), 296M (720p)
• Audio: 24-bit, 48kHz, SMPTE 299M
• Time-Code: RP-188 1080i Lines: 14, 16, 577, 579
Connector: 75Ω BNC
Balanced Analog Audio I/O
• 24-bit A/D and D/A, 2 channels, 48kHz
• Inputs are switchable between line and microphone level with +48V phantom power
• Mic Pre-amp with 10 to 65 dB gain
Connectors: 3-pin XLR (Inputs) and 5-pin XLR (Output)
Unbalanced Analog Audio Out (Headphone)
Connector: 3.5 mm Stereo Plug
Linear Time Code
Standards:
• SMPTE RP-188 (HD)
• HD 1080i Lines: 14, 16, 577, 579
Connector: 75Ω BNC
1394
• Currently not operational
MPEG2 Profiles
• 422P@HL: 100, 140, 180, 220, 280 Mbps VBR 4:2:2 I-Frame Only, 1920x1080i/p,
1280x720p
• 422P@HL: 50, 80, 100, 140, 180 Mbps VBR, 4:2:2 Long GOP, 1920x1080i/p, 1280x720p
• MP@HL: 18/35 Mbps VBR, Long GOP 4:2:0 (XDCAM EX), 1920x1080i/p, 1280x720p
Convergent Design, Inc 28
To Next Page
Loading...
Need help?
General