PRESSURE COOKER LID MARKINGS
Please note the "UNLOCK" and "LOCK"
markings on the rim of the pressure
cooker body (13) and the“ ”on the rim
of the Lid (2). To properly close and
secure the pressure cooker Lid (2),
always line up the "LOCK" marking on
the Upper Ring (9) and the “ ”on the
rim of the Lid (2) (see Figure 4).
PRESSURE LIMITING VALVE
WARNING
WARNING: Avoid serious injury. Always
use tongs or a long kitchen tool to set
the valve to EXHAUST.
CAUTION HOT STEAM: KEEP HANDS AND
FACE AWAY FROM THE PRESSURE
LIMITING VALVE WHEN ROTATING TO
EXHAUST.
CONDENSATION CUP ASSEMBLY
The Condensation Cup is the clear plastic
piece that snaps into the back side of the
pressure cooker as shown on the left.
Place condensation cup in rear of the
unit until it locks into place (shown in
Figure 6; it is part 12 in the diagram on
page 5).
To Next Page
Loading...
