Need help?Do you have a question about the Coolcentric CDU-AC5 and is the answer not in the manual?
General| Brand | Coolcentric |
|---|---|
| Model | CDU-AC5 |
| Category | Gateway |
| Language | English |
This section provides an overview of the installation, configuration, and operation of the CDU-AC5.
Details the key features and functionalities of the CDU-AC5, including graphic hosting and alarming.
Illustrates the system architecture, showing how the CDU-AC5 connects to CDUs and other systems.
Describes the different mounting options for the CDU-AC5, including cabinet and CDU mounting.
Explains how to mount the CDU-AC5 horizontally in a standard 19-inch cabinet.
Details the vertical mounting procedure for the CDU-AC5 within a CDU frame.
Details the various ports and terminals for connecting the CDU-AC5, including Ethernet and MODBUS.
Explains the function of the unit's status LED, service button, and selector switches.
Guides on connecting the CDU-AC5 to either a 24Vac or mains power supply.
Describes the connection of CDUs to the CDU-AC5 via a LonWorks twisted pair network.
Outlines the requirements for accessing the CDU-AC5 through a client PC and Internet Explorer.
Explains the automated process of downloading and installing the ActiveX control for system access.
Provides general information on CDU-AC5 capabilities and firmware versions affecting CDU capacity.
Details the procedure for assigning a unique network address to each CDU connected to the gateway.
Explains the steps required to attach a configured CDU to the CDU-AC5 gateway.
Allows configuration of basic CDU-AC5 parameters like Site Name, IP Address, and Ports.
Describes how to manage the user database, including adding users and setting access levels.
Configures re-transmission options for alarm groups, including email and GSM.
Enables configuration of when datalogs (plots) are emailed out.
Notes that the S Days, Ip Out, and Trend screens are not utilized in the current release.
Explains how to customize the default schematic displayed when users log on.
Provides step-by-step instructions for naming the site map schematic within the system.
Details the process for naming individual CDU units within the site map configuration.
Guides the user through the process of logging into the CDU-AC5 web interface.
Explains how to move between different system schematics using navigation buttons.
Details the overview schematic which provides an at-a-glance status of the CDU's real-time data.
Describes the alarms schematic, listing Level 1 and Level 2 alarms and their current status.
Explains how to access historic data logs and view run hours for pumps and valves.
Provides information on low-level hardware input and output values for diagnostic purposes.
Covers access to and adjustment of CDU parameters, requiring user account privileges.
Details how to display the filtered alarm list, allowing selection by CDU.
To Next Page