To Next PageTo Next Page
Need help?Do you have a question about the Coolerado C60 and is the answer not in the manual?
Learn how to identify your specific Coolerado air conditioner model and serial number.
Discover the advantages of your Coolerado air conditioner, including efficiency and air quality.
Details cooling capacity, power, airflow, and weight for M30, M50A, and C60 models.
Explains the Maisotsenko Cycle and its effectiveness in dry climates and for pre-cooling.
Describes how the HMX cooling is based on wet bulb temperatures without adding moisture.
Key operational points, filter checks, thermostat use, and airflow restrictions.
Critical warnings about controlling the system, water pressure, and safety precautions.
Explains the meaning of DANGER, CAUTION, and NOTE symbols for hazard identification.
Covers fan inspection, cleaning, and ensuring the unit remains level and supported.
Details water supply inspection, leaks, pressure, drain cleaning, and water quality considerations.
Discusses how water composition and temperature affect HMX materials and potential scaling.
Explains hard water problems like scaling and the need for water softeners.
Lists required filter sizes for models and emphasizes regular replacement for optimal airflow.
Step-by-step guide for removing and installing air filters on the M30 unit.
Step-by-step guide for removing and installing air filters on the M50A unit.
Instructions for inspecting side louvers for mineral buildup and replacing the pad if necessary.
Explains the unit's self-wetting system activated upon powering up or restarting.
Advises on checking and topping up the surfactant reservoir with detergent as needed.
Details the programmed water and surfactant cycles for initial startup and wetting.
Explains water and fan cycling during normal operation and periods without cooling calls.
Describes temperature, fan, and system mode controls for optimal operation.
Highlights the optional thermostat's variable fan speed, user interface, and display.
A comprehensive guide to safely shutting down the unit for winterization.
A comprehensive guide to preparing the unit for operation at the beginning of the cooling season.
Introduces HMX cleaning as preventive maintenance and discusses frequency based on conditions.
Lists necessary tools for cleaning and emphasizes the critical step of disconnecting power.
Instructions for removing the filter access panel, plenum, and air filters.
Guides on applying vinegar to HMX faces and working air channels.
Warns against high pressure washing and advises using gentle methods to protect HMX coatings.
Covers washing HMX, cleaning components, and reassembling the unit with new filters.
Explains restarting the unit to ensure HMXs are properly wet out after cleaning.
Addresses cleaning hardened soap from HMX nipples due to improper operation or lack of water.
Warns about potential damage from frequent header/nipple service and handling.
Details removing tubing and using a syringe with vinegar to clear blocked HMX nipples.
Specifies the warranty periods for HMXs and other parts from installation or shipment.
Lists conditions that void the warranty and common exclusions like improper maintenance.
States this warranty is exclusive and supersedes all other implied or express warranties.
Clarifies that only published information defines Coolerado's product performance and warranty obligations.
General| Brand | Coolerado |
|---|---|
| Model | C60 |
| Category | Industrial Equipment |
| Language | English |
