6
Connecting Your Wi-Fi Device to Your Mobile Hotspot
1. Power on your mobile hotspot.
2. On your computer or other Wi-Fi enabled device, search for available Wi-Fi networks
and select network name (SSID) located on label on back panel of your mobile
hotspot.
Note: Wi-Fi name (SSID) and Wi-Fi Password are located on the label inside the back
cover of the device.
• From a Windows computer: Left-click Wireless Network Connection on the
task bar to view available networks. Choose the SSID from the list of available
networks.
• From a Mac computer: Select System Preferences > Network. Choose the
SSID from the list of available networks.
• From an iOS device: Go to Settings > Wi-Fi. Choose the SSID from the list of
available networks.
• From an Android device: Go to Settings > Wi-Fi. Choose the SSID from the list
of available networks.
3. Enter the password located on label on back panel and click OK.
Using the WPS
If your Wi-Fi device supports WPS, you do not have to input the password manually after
a WPS connection has been established. Please follow the following steps:
1. Power on your Mobile Hotspot and enable the Wi-Fi function from the device you
would like to connect.
2. Press and hold the WPS key on your device for 3 seconds to start the Wi-Fi
Protected Setup authentication process.
To Next Page
Loading...
