12
broadcasting the hotspot’s Network Name (SSID).
6. Click Apply to save your changes.
Changing Mobile Hotspot Wi-Fi Password
1. Access http://mobile.hotspot or http://192.168.0.1.
2. Click Settings in the navigation area.
3. Select the Wi-Fi Settings tab.
4. Select WPA2-PSK for the Security Mode.
5. Enter a new password in the Password field.
6. Click Apply to save your changes.
WPS
You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN code) or PBC (push-button)
mode. If your client device supports WPS, there’s no need to enter the password manually
when WPS is available.
• PIN: Enter the PIN that is generated by the wireless access client.
• PBC: Select PBC or press the WPS button on the device.
Note: If there is no client connected to the Hotspot within two minutes, WPS will be
deactivated.
Network Settings
• Network Selection: Click Automatic or Manual to search for available networks
automatically or manually.
• WAN Connection Mode Settings: Click Automatic or Manual to connect to the
network automatically or manually.
• APN: Set the Access Point Name (APN) including profile, PDP type, profile name,
APN, authentication, user name and password.
To Next Page
Loading...
