Cooper F6-PA-LS - Additional Information and Training; Support and Resources; Testing Aids and Training

Replacement Kits
Replacement kits for the Form 6-LS control are available
through the factory Service Department. To order these
kits, refer to the Replacement Parts price list for catalog
numbers and pricing. Contact your Cooper Power Systems
representative for additional information and order
procedures.
Factory-Authorized Service Centers
Factory-authorized service centers are located throughout
the continental United States to provide maintenance,
repair and testing services for controls and reclosers. For
further information, contact your Cooper Power Systems
representative.
Factory Maintenance Classes
The factory service department offers a basic testing and
troubleshooting course for the Form 6 microprocessor-
based electronic recloser control. This course, taught by
experienced service technicians, is held at the factory’s
in-house training facility. For additional information, contact
your Cooper Power Systems representative.
Type MET Recloser Control Tester
A 30-minute video cassette program KSPV7Kyle
®
Type
MET Electronic Recloser Control Tester Operation and
TestingProcedures is available as a supplemental training
aid for service personnel.
S280-70-10
47
CAUTION: This equipment requires routine
inspection and maintenance to ensure proper
operation. If it is not maintained, it can fail to operate
properly. Improper operation can cause equipment
damage and possible personal injury. G105.1
ADDITIONAL INFORMATION