Cooper Kyle Form 4C - Page 8

The following example illustrates how the control’s phase and ground minimum trip levels are changed and verified,
using the keyboard. Phase minimum trip is changed from 100 A to 200 A. Ground minimum trip is changed from 50 A to
100 A.
8
Kyle Form 4C Microprocessor-Based Recloser Control Programming Guide
DISPLAY
ON
OFF
ENTER
RECLOSE
3
Step
No.
Touch Key
1.
6.
CODE
2.
3.
Change Phase Minimum Trip Value
CODE VALUE
EXAMINE PHASE
SCROLL CODE
CHANGE GROUND
Display
Message
Access
Code
Complex
TCC
Parameter
Value
CODE VALUE
CODE
VALUE
CODE
VALUE
ENTER
4.
EXAMINE PHASE
SCROLL CODE
CHANGE GROUND
CODE
VALUE
9
RECLOSE
3
9
SCROLL CODE
MIN TRIP
7.
CODE VALUE
1
CHANGE
8.
EXAMINE PHASE
SCROLL CODE
CHANGE
GROUND
CODE
VALUE
5.
EXAMINE PHASE
SCROLL CODE
CHANGE GROUND
EXAMINE PHASE
SCROLL CODE
CHANGE GROUND
CODE
VALUE
As the security code is
entered, the dashes disappear.
The security code will not appear
in the display.
ENTER SECURITY CODE
9.
CODE
VALUE
ENTER NEW VALUE
EXAMINE PHASE
SCROLL CODE
CHANGE
GROUND
10.
CODE
VALUE
EXAMINE PHASE
SCROLL CODE
CHANGE GROUND
ENTER