To Next PageTo Next Page
Need help?Do you have a question about the Cooper CF1200 and is the answer not in the manual?
General| Brand | Cooper |
|---|---|
| Model | CF1200 |
| Category | Control Panel |
| Language | English |
Details standards and requirements for system design, including loop lengths and loading.
Details power, battery, inputs, outputs, and other technical specifications.
Describes panel outputs and functions compliant with EN54 standards.
Provides general guidelines and warnings for the correct installation of the panel.
Outlines regular maintenance procedures including daily, weekly, and annual checks.
Explains the walk test mode for efficient system testing by a single engineer.
Covers panel configuration features like sounder checks and LED flashing.
Provides diagrams and information for diagnosing and rectifying panel faults.
Describes the software used for programming, configuring, and downloading data to panels.
Details the procedure for activating the building evacuation sequence via supervisor mode.
Explains how to silence all active sounders on the system from the panel interface.
Describes how to access and view system faults reported by connected devices.
Explains how to perform detailed tests on individual devices using service access.
Describes loading configuration data from a laptop to the panel's Current Data Record.
Explains how to download the panel's configuration data to a laptop for backup.
Details the process of automatically learning devices on the loop and its effect on existing data.
Details configuration options for Inputs/Outputs and sounder timing (T1).
Details configuration options for Inputs/Outputs and sounder timing (T2).
Explains how to configure the functions of the panel's output relays and interfaces.
Explains how to assign devices to specific zones for logical grouping and management.
Details the process of changing the supervisor access passcode for enhanced security.
