Cooper Kyle Form 4C - User Manual

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hazard Statement Definitions . . . . . . . . . . . . . . . 2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Control Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Keyboard Functions . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the Control Clock . . . . . . . . . . . . . . . . . . . 6
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . 6
Interrogation of Program Settings . . . . . . . . . . . . 7
Changing and Verifying Control
Program Settings . . . . . . . . . . . . . . . . . . . . . . . . . 7
Changing Control Settings Using
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control Interrogation Using
the SCROLL Key . . . . . . . . . . . . . . . . . . . . . . . . . 11
Control Interrogation Using
the Select ACCESSORY Key . . . . . . . . . . . . . . . 11
Control Interrogation Using
the ACCESSORY SCROLL Key . . . . . . . . . . . . . 11
Downloading to a Data Reader . . . . . . . . . . . . . . . 12
Control Operation with a Personal Computer . . . 13
Control Interface Software Program . . . . . . . . . . 13
Standard Access Codes and Parameters . . . . . . 14
Accessory Access Codes and Parameters . . . . . 16
Access Code Descriptions . . . . . . . . . . . . . . . . . . 17
1
Reclosers
Kyle
®
Form 4C Microprocessor-Based Recloser
Control Programming Guide
S280-77-4
Service Information
February 2003 • Supersedes 9/01
Printed in USA
Figure 1.
Kyle
®
Form 4C Microprocessor-Based Recloser Control shown with KSPS2 software.
Contents

Summary

SAFETY INFORMATION

Safety Instructions

General caution and warning statements related to equipment operation and maintenance.

Hazard Statement Definitions

Explains the meaning of DANGER, WARNING, and CAUTION hazard statements.

INTRODUCTION AND BASIC OPERATION

Introduction

Overview of the programming guide's purpose and scope.

Control Security System

Details security levels and factory programmed codes for access.

Keyboard Functions and Operation

Describes keyboard functions, setting clock, and basic operational procedures.

PROGRAMMING AND PARAMETER CONFIGURATION

Interrogation and Changing Settings

How to display and modify programmed parameter settings.

Standard Access Codes and Descriptions

Lists and describes standard access codes for parameters.

DATA HANDLING AND SPECIFIC FEATURES

Data Downloading and PC Operation

Procedures for downloading data and operating via PC.

Feature Configuration

Details on Phase ID, Feature ON/OFF, Ground Fault, High-Current Trip.

SYSTEM MONITORING AND ADVANCED SETTINGS

System Monitoring and Diagnostics

Operations Counter, Metering, Status Codes, Malfunctions, Event Recorder.

Advanced Configuration and Modifiers

Line Frequency, Firmware, Close/Retry, Communications, TCC Modifiers.

Cooper Kyle Form 4C Specifications