Need help?Do you have a question about the Cooper CF3000 and is the answer not in the manual?
General| Model | CF3000 |
|---|---|
| Voltage Rating | 120/240 VAC |
| Enclosure Type | Metal |
| Type | Control Panel |
| Manufacturer | Cooper |
Introduction to the CF3000 system, its features, operation, and installation.
Outlines a typical program and timetable for a CF3000 installation project.
Guidelines for system design, loop lengths, loop loading, and repeater panels.
Lists CF3000 system components, order codes, descriptions, and dimensions.
Details on Analogue Photoelectric, Photo/thermal, and Heat Detectors.
Describes surface, flush, and weatherproof callpoints and their accessories.
Information on loop powered sounders, beacons, and base sounders.
Details on standalone sounders and loop powered beacons.
Details on 3 Channel I/O devices (CIO351, CIO351T, CIO351S).
Details on 1 Channel I/O, Zone Monitor Unit, and Shop Monitor Unit.
Details on Spur Isolator, 4 Way Sounder Controller.
Information on various micro interface modules like MCIM, MCOM, MIU872.
Details on fan controller interfaces for AHU fan control.
Overview of the system, user interface, and technical specifications.
Describes functions approved by EN54 Parts 2 & 4.
Details optional functions not approved by EN54.
Information on cable types, wiring, installation, fixing, and external connections.
Information on networking up to 126 panels or repeaters.
Details panel inputs (Class Change) and panel outputs (Sounders, Fire Alarm Routing, etc.).
Details outputs and inputs for Fire Brigade Panel communication.
Electrical characteristics of inputs and relay outputs for the German interface.
Instructions for attaching the panel door to the backbox.
Method for fitting an optional hinged cover to the panel.
Procedure for opening the printer access and replacing the paper roll.
Details on walk test mode for testing detectors and callpoints.
Covers DB Level Check, Detector LED Flashing, and PC Software Up/Download.
Provides diagrams and information for panel fault finding.
Explanation of communication protocol format and waveforms.
Details on Device Input Programming and Isolate Zone/Address features.
Covers Delay Configuration and MCP Override options.
Details Dependency Type C for panel outputs.
Details panel controls, LEDs, touch screen display, and basic operations.
Covers Public Access, Evacuate, Silence, Mute Buzzer, Reset, Pre-Alarms, Disabled Devices, and Faults.
Covers Enable/Disable, Print, Lamp Test, Weekly Test, View Events, Auto Config, Replace Device, and Test modes.
Details procedures for loading/downloading CDR, Auto Learn, and Erase Log.
Configuration of System Details, Analogue Level, Printer, Panel Number, Network, and Screen Cover.
Programming I/O, Sound Settings, Date/Time, Text changes, User Code, and Zone/Device management.
Configuration of Network settings and Password Protection.
Installation and connection details for the Spur Isolator.
Installation and connection details for the 4 Way Sounder Controller.
Installation and connection details for the Zone Monitor Unit.
Installation and connection details for the Shop Monitor Unit.
Installation and connection details for the 1 Way Input/Output Unit.
Wiring details for the CAB300 Detector Base.
Diagram illustrating system wiring connections.
Installation and connection details for the Weatherproof Wall Sounder.
Installation and connection details for the Internal Wall Sounder.
Technical specifications for the Base Sounder.
Installation and connection details for the 3 Way Input/Output Unit.
Connection details for the Loop Powered Beacon.
Standard connection details for Callpoints.
Information on EN54 product specification labels.
Guidelines for the safe disposal of batteries.
Information on CE marking and product approvals.
To Next Page
