Cooper CF3000 - Configuration Options

CF3000 - USER MANUAL
43
Configuration
DB Level Check
CF3000 includes the facility to test and set the system sounders with the minimum amount of
disturbance. In sounder test mode, the sounders will sound for 30 seconds on then 30 seconds off. This
facility can be accessed via the engineering menu.
Detector LED Flashing
The CF3000 detector flashing function is used to allow a visual inspection and confirmation that the fire
panel is in communication with the installed system devices. This facility can be accessed via the
engineering menu and can be switched on or off at any time as required.
Up/Downloading Using PC Software
The PC Software enables the address, location text, device type and any comments to be downloaded to
the CF3000 panels.
The software can download to all 126 networkable panels.
The PC is connected to each panel on the network in turn. All data for the panel is downloaded.
For networked systems, panels are identified by panel number, P1, P2 etc.
Section 3 - Commissioning
Powe r
ON
FIRE
General
FAULT
System
DISABL E
System
FAULT
System
TEST
Charge
FAULT
Battery
FAULT
1
2
3
4
5
67
8
9
21
22
23
24
10 11 12
13
14 15
16 17
18
19 20
25
26 27
28 29 30 31
32
33
34
35 36
37
38 39 40
41 42 43
44
45
46 47
48
49 50
51 52
53
54
55
56
57
58 59
60
61
62
63 64
65 66
67
68 69
70 71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86 87
88
89 90
91 92
93 94
95
96
Zones