Cooper CF3000 - Global LED Flashing On;Off

CF3000 - USER MANUAL
70
Global Flashing LED On/Off
To activate the touch screen, touch the top left corner of the screen until the screen illuminates. To enter
the supervisor mode touch the supervisor button and enter the service passcode.
Enter the Service Mode and Select Test.
Section 4 - Panel Controls and Indicators
If global LED flashing is
set to on, all device
LED’s will pulse
intermittently to
confirm correct
communication.
Select “Global Flashing
LED On/Off” from the
Test Menu Screen.
Global Flashing LED’s
Flashing Off
Reset
Service
FRE off
Exit
Mute
Buzzer
Test Device
Test Zone
Sounder Level Test Mode
Globle Flashing LED on/ff
One Walk Walk Test
Reset
Service
FRE off
Exit
Mute
Buzzer
Commission
Configure
Test
Enable/Disable Address