Cooper CF1200 - Programming I;O and Sounders. Panel Outputs

Programming I/O and Sounders . Panel OutputsProgramming I/O and Sounders . Panel Outputs
Service
FRE off
Service
FRE off
CommissionCommission
TestTest
ConfigureConfigure
ResetReset
Enter the Service Mode and Select Configure. Enter the Service Mode and Select Configure.
Service
FRE off
Service
FRE off
ResetReset
ExitExit
Change User CodeChange User Code
Programming I/O and SoundersProgramming I/O and Sounders
Change Date/TimeChange Date/Time
Change TextChange Text
Configure ZonesConfigure Zones
Add/DeleteAdd/Delete
NetworkNetwork
Configure Heat DetectorsConfigure Heat Detectors
LanguageLanguage
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Press panel outputs -
NOTE Interface
Inputs/Interface
Outputs are only used
in certain export
markets
Press panel outputs -
NOTE Interface
Inputs/Interface
Outputs are only used
in certain export
markets
ExitExit
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
ExitExit
Service
FRE off
Service
FRE off
ResetReset
T1T1
Panel OutputsPanel Outputs
Auxiliary BoardAuxiliary Board
T2T2
Mute
Buzzer
Mute
Buzzer
Alarm Verification FeaturesAlarm Verification Features
Day/NightDay/Night
71