Cooper CF1200 - Faults

FaultsFaults
Enter Supervisor Mode Passcode and select “Faults” tab.Enter Supervisor Mode Passcode and select “Faults” tab.
EvacuateEvacuate
Silence
Alarms
Silence
Alarms
ResetReset
Supervisor
FRE Off
Supervisor
FRE Off
Pre-alarm = Some smoke /heat but below fire threshold
These warnings will appear and disappear
Pre-alarm = Some smoke /heat but below fire threshold
These warnings will appear and disappear
Mute
Buzzer
Mute
Buzzer
OthersOthers
Fires
AC = 0
Fires
AC = 0
Pre
Alarms
Pre
Alarms
DisabledDisabled
FaultsFaults
Enable/Disable (others Menu)Enable/Disable (others Menu)
EvacuateEvacuate
Silence
Alarms
Silence
Alarms
Mute
Buzzer
Mute
Buzzer
ResetReset
Supervisor
FRE Off
Supervisor
FRE Off
OthersOthers
View LogView Log
Check
Auto Config.
Check
Auto Config.
PrintPrint
Lamp testLamp test
Fires
AC = 0
Fires
AC = 0
Pre
Alarms
Pre
Alarms
DisabledDisabled
FaultsFaults
Weekly TestWeekly Test
Enable/DisableEnable/Disable
Enter the Supervisor Mode passcode and select the “Others” tab. Enter the Supervisor Mode passcode and select the “Others” tab.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
passcode.
44