Cooper CF1200 - Programming I;O and Sounders T1

Programming I/O and Sounders T1Programming I/O and Sounders T1
Service
FRE off
Service
FRE off
CommissionCommission
TestTest
ConfigureConfigure
ResetReset
Enter the Service Mode and Select Configure. Enter the Service Mode and Select Configure.
Service
FRE off
Service
FRE off
ResetReset
ExitExit
ExitExit
Day/NightDay/Night
Programming I/O
and Sounders
Programming I/O
and Sounders
Change Date/TimeChange Date/Time
Change TextChange Text
Configure ZonesConfigure Zones
Add/DeleteAdd/Delete
NetworkNetwork
Configure Heat DetectorsConfigure Heat Detectors
LanguageLanguage
Service
FRE off
Service
FRE off
ResetReset
T1T1
Panel OutputsPanel Outputs
Auxiliary BoardAuxiliary Board
T2T2
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.Then
press T1
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.Then
press T1
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
ExitExit
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Change PascodeChange Pascode
Alarm Verification FeaturesAlarm Verification Features
T1T1
160 secs160 secs
ExitExit
100 secs100 secs
40 secs40 secs
150 secs150 secs
90 secs90 secs
30 secs30 secs
180 secs180 secs
120 secs120 secs
60 secs60 secs
170 secs170 secs
110 secs110 secs
50 secs50 secs
140 secs140 secs
80 secs80 secs
20 secs20 secs
130 secs130 secs
70 secs70 secs
10 secs10 secs
OffOff
69