Cooper CF1200 - Programming I;O and Sounders Alarm Verification

Programming I/O and Sounders Alarm VerificationProgramming I/O and Sounders Alarm Verification
Enter the Service Mode and Select Configure. Enter the Service Mode and Select Configure.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Service
FRE off
Service
FRE off
ResetReset
Enter the Service Mode and Select Configure. Enter the Service Mode and Select Configure.
Service
FRE off
Service
FRE off
ResetReset
ExitExit
ExitExit
Day/NightDay/Night
Programming I/O
and Sounders
Programming I/O
and Sounders
Change Date/TimeChange Date/Time
Change TextChange Text
Configure ZonesConfigure Zones
Add/DeleteAdd/Delete
NetworkNetwork
Configure Heat DetectorsConfigure Heat Detectors
LanguageLanguage
Service
FRE off
Service
FRE off
ResetReset
T1T1
Panel OutputsPanel Outputs
Auxiliary BoardAuxiliary Board
T2T2
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.Then
press Alarm Verification
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.Then
press Alarm Verification
ExitExit
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Mute
Buzzer
Change PascodeChange Pascode
Alarm Verification FeaturesAlarm Verification Features
CommissionCommission
Alarm verification feature
Activate AVF?
Alarm verification feature
Activate AVF?
ConfigureConfigure
EnabledEnabled
DisabledDisabled
ExitExit
TestTest
73