WaveLinx Networked Relay Panel Quick Start (Version 15)
www.cooperlighting.com 11
Verify WaveLinx Networked Relay Panel Import and Rename the Panel (Optional)
Check the relay panel import for all expected relays and dimmers. During the check, the panel can be renamed from the default name
given (optional). Before beginning these steps, open the WaveLinx Mobile App and Login to the WaveLinx Area Controller.
Follow the steps below to view the imported Relay Panel:
1 – If not already displayed, select ,
and tap Devices.
For tablet devices or devices being
used in landscape view, tap on the
WaveLinx Area Controller.
2 – Locate and then tap the panel
to expand it.
3 – Verify that the correct number of
relays and dimmers are displayed.
4 – Optionally rename the panel. Tap
DETAILS and then tap next
to the Panel Name in the Device
Details. Enter the desired panel
name and then tap to save.
For tablet devices or devices being
used in landscape view, tap on the
panel, and then tap next to the
Panel Name in the Device Details.
To Next Page
Loading...
