- 10 -
4012MBindicatesthetotalcapacityofyour
masterdisc.
0indicatesyouhavemadezerocopiesthusfar.
10%indicatesthecurrentpercentageofthe
copyingprogress.
401MBindicatesthecurrentamountofdatathat
hasbeencopiedfromthemasterdisc.
Step 5: After 2 or 3 seconds of processing time, one of the following Copy progress screens
will appear. The left-hand screen is shown when “Specify Counter” is selected and the right-
hand screen is shown when “No Counter” is selected.
“Specify Counter” “No Counter”
It is normal to see the progress indicator stay at 0-10% and 100% for
approximately 30 seconds for CD duplication and up to 1 minute for DVD
duplication. That is caused by the initializing and finalizing stages.
Step 6: Once the duplication run is completed, the successful copies will be ejected and you
shall see the following screen.
Step 7: Remove the successful copies and refill the trays with additional blank media to
continue making more copies. You can also press the “ESC”/Escape button to terminate
your project and go back to the main menu.
If you’ve specified a counter value for your project and your project is completed, you shall
see the following screen:
You can then press “ENT”/Enter to go back to main menu.
If you happen to have any failed discs (bad copy), the failed disc(s) will not be
ejected automatically. You need to manually eject them and throw them away if
they are write once recordable disc(s).
4012MBindicatesthetotalcapacityofyour
masterdisc.
0/21indicatesyouhaveaprojectsizeof
twenty‐onecopiesandyouhavemadezero
copiesthusfar.
10%indicatesthecurrentpercentageofthe
copyingprogress.
401MBindicatesthecurrentamountof
datathathasbeen
copiedfromthemaster
disc.
“PASS7”indicatesthatyou’vejustmade7successfulcopies.
“FAIL0”indicatesthatyouhavenofailureinthisrun.
“7”indicatesthatyou’vesuccessfullycopied7copiessofar.
PASS 7 FAIL 0( 7)
Waiting for Blanks
Pass 21 Fail 0
Job Completed! Press OK to Finish
Copying... 4012MB
0/21 10% 401MB
opying ... 4012MB
0
401MB
To Next Page
Loading...