- 51 -
Error
Code
Error Message Description & Recommended Solutions
240
Wrong
Password!
Description:
The password entered is not correct
Possible Solution:
Please confirm you typed in the correct password or try a different
password.
241 Login Failed
Description:
An incorrect password was entered 3 times consecutively
Possible Solution:
Wait for 5 minutes, then try to use the correct password for next the
attempt. If the problem persists, call Tech Support.
250
Source Cannot
Be HDD
Description:
The source is configured in the hard drive when trying to perform the
Mix Audio Tracks function.
Possible Solution:
Change the Copy source to the Reader.
251
Copy Audio
Error
Description:
An error occurred during the mixing process of your audio CD.
Possible Solution:
Try a different master or blank disc.
252 Not Audio CD
Description:
The Master Disc is not an Audio CD when preparing the mixing
process.
Possible Solution:
Please verify your master disc is an Audio CD.
253
Over Blank Disc
Capacity
Description:
The total size of the selected tracks is larger than the capacity of the
target blank disc during the track selection process.
Possible Solution:
Try to select an alternative track with a smaller capacity.
260 No Update File
Description:
The system can NOT locate the Firmware Update File during the
Update Firmware process.
Possible Solution:
1. Confirm the file is not a “zip” file. If it is, please extract it before
you burn it into a CD.
2. Confirm the update file is written as “Mode 1” Data CD. Usually a
Data CD created with Windows XP or Roxio’s Drag-to-Disc is not in
this format. Please use a software like Nero Burning ROM.
3. Make sure there are no other discs in the system and try to insert
the update disc into another tray to perform the operation.
To Next Page
Loading...