EasyManua.ls Logo

Cord DJ-U Pro - Page 11

Cord DJ-U Pro
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjusng the Tonearm & Stylus Contd
Headshell end is too heavy. Turn the
counterweight Counter-Clockwise.
Counterweight end is too heavy.
Turn the counterweight Clockwise.
PROPER TONEARM BALANCE
ANTI-SKATE / TRACKING FORCE ADJUSTMENT:
To adjust the An-Skate mechanism, turn the An-Skate dial so that the number corresponding to the
required tracking force is opposite the index line (3.0~4.0 grams for the standard stylus/cartridge as per
the last instrucon). The numbers on the An-Skate Knob correspond to a gram of tracking force.
An-Skate Dial
Index Line
CARTRIDGE NOTES:
The Audiotechnica AT-3600L cartridge
that comes standard with this unit
has a recommended tracking force of
3.0~4.0 grams.
Turn the counterweight to the ‘3’
mark on the tracking force scale dial.
*The Audiotechnica AT-3600L Car-
tridge is an ‘MM’ or Moving Magnet
type.
NOTE: Dierent Cartridge & Stylus
brands and combinaons will require
dierent counterweight and An-
Skate sengs. Refer to the instruc-
ons that came with your Catridge
and/or Stylus if you are using aer-
market parts.
10